D-Link DWR-710 User Manual

36D-Link DWR-710 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows Vista
Windows
®
Vista
™
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
®
Vista
™
utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select Connect to a network.
If you receive the Wireless Networks Detected bubble, click on the center of
the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings
for your wireless adapter. Refer to the Networking Basics section in this manual
for more information.

D-Link DWR-710 Specifications

General

Brand	D-Link
Model	DWR-710
Category	Network Router
Language	English