Name: D-Link EasySmart DGS-1100-24
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

D-Link EasySmart Switch User Manual

Figure 19 – SmartConsole Device Settings

NOTE: The EasySmart Switch automatically

sends out discovery packets to maintain the

connection between the devices and

SmartConsole Utility. Therefore, ensure to

configure the Group Interval setting.

Device Password Manager

Select a switch from the Device List. Click on this icon to launch the Device Password Manager window.

Here you can enter a new password and confirm it.

Figure 20 – SmartConsole Device Password Manager

Multi Firmware Upgrade

Select one or many switches of same model name from the Device List. Click on this icon to launch the

Firmware Upgrade window. Specify the Firmware Path (or Browse for one) that you are going to use. Input

the correct password of device, and then click Upgrade. The state will show "OK" after completion, and “Fail”

is firmware upgrade fails or cannot be completed for any reason.

Questions and Answers:

Need help?

Do you have a question about the D-Link EasySmart DGS-1100-24 and is the answer not in the manual?

D-Link EasySmart DGS-1100-24 Specifications

General