24
8. Fill a spray bottle with the sanitizing solution and spray all corners and
edges making sure to cover all surfaces with the solution. Soak the flake
cover and slideway in the solution and put back in place after drying.
9. Allow the solution to be in contact for at least 3 minutes, then dry.
10. Repeat step 6 to rinse the ice making system one more time.
11. Reassemble the front cover.
12. Turn on the power again. The machine will return to the regular ice
making mode. Discard the first batch of ice.
Control Box (See diagram on page 30.)
C
To Next Page
Loading...
General