DESCRIPTION OF PARTS
! WATER GUIDE KNOB
During washing, WATER GUIDE KNOB should be selected
to wash.
During spin rinsing, WATER GUIDE KNOB should be
selected to spin.
@ WASH TIMER
Use to select the desired time for washing or rinsing.
# WASH ACTION
This is used to select wash action.
$ VALVE SELECTOR
Select “WASH • RINSE” for washing and rinsing, and
“DRAIN” to drain the water.
“OFF” to turm off drain pump (Only Pump model)
% SPIN TIMER
Use to select the desired time for spinning.
CONTROL PANEL
WATER DRAIN HOSE
(PUMP MODEL)
PULSATOR
BASE UNDER
OVERFLOW FILTER
SPIN DRYER LID
When you open this lid while
the spin basket is spinning,
the spinning will be stopped
by brake system.
LINT FILTER
This is used for gathering the
dregs which are made during
washing.
WASH TUB LID
During operation, close the
wash tub lid.
POWER CORD
The plug’s shape may not correspond
with this drawing.
“WARNING-THIS APPLIANCE
MUST BE EARTHED”
SAFETY COVER
INNER LID
SPIN DRYER BASKET.
WATER DRAIN HOSE
(NON-PUMP MODEL)
GUIDE
CASCADE
!#@$%
DW-6834(¿ )-Western 01.3.26 9:30 PM ˘`1
To Next Page
Need help?
General
