25
You can save the microwave cook used frequently in the memory.
MEMORY COOK (with Microwave Feature)
1. Turn the Menu Dial knob to adjust to MEMORY COOK .
2. Turn the Control Dial knob to select the number of memory.
(example: When you select the second momory storage )
3. Press the Start button .
The oven starts working.
4. The display shows “End” and beep sounds when the cooking is completed.
12 3
1 0:40 P-HI (100%)
2 1:20 P-HI (100%)
3 2:00 P-HI (100%)
Note : When the oven comes out of the factory, Memory cook has been programmed as below.
But you can change the contents of memory cook later. (refer to next page)
No Cooking time Microwave power level
NOTE:
•
When you operate the oven at the first time, smoke and bad odor might come out from the
oven. Then, it will be helpful to operate the oven in Convection cook at 250˚C with no food
for about 10 minutes.
• The cooling fan could be operated for a few minutes after cooking for the safety.
The display will show “Cool” and “0” or “current time” in turns while the cooling fan is
operated.
WARNING: The oven and accessories are very hot after cooking.
Use a thick oven glove while you are handing food or accessories.
Make sure that a metal tray is laid on the first level in the oven before Memory
cooking.
To Next Page
Need help?
General
