Why does Daikin Heat Pump schedule timer work, but actions are executed at the wrong time?
If the schedule timer on your Daikin Heat Pump executes actions at the wrong time, verify that the clock and day of the week are set correctly. Correct them if necessary.
What happens if the benefit kWh rate signal prevents my Daikin EKHVH008BB6V3 Heat Pump compressor from starting?
If the compressor in your Daikin Heat Pump isn't starting, it may be due to a benefit kWh rate signal sent by the electricity company. In this case, you should wait for the power to return.
Why won't the compressor start on my Daikin EKHVH008BB6V3 with benefit kWh rate power supply?
If the compressor in your Daikin Heat Pump isn't starting, it could be due to a mismatch between the benefit kWh rate power supply settings and electrical connections. If [D-01]=1 or 2, the wiring requires a specific installation. Other correctly installed configurations are possible, but are specific to the type of benefit kWh rate power supply type at the site.
General| Category | Heat Pump |
|---|---|
| Model | EKHVH008BB6V3 |
| Coefficient of Performance (COP) | 4.0 |
| Energy Efficiency Class (Heating) | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
Explains safety symbols like DANGER, WARNING, CAUTION, and NOTICE.
Details dangers of electrical shock and necessary safety measures during operation and maintenance.
Warns about touching hot/cold pipes and internal parts, advising protective measures.
Explains how to operate the digital controller, including its features, functions, clock, and schedule timer.
Details the function of each button and icon on the digital controller for effective operation.
Provides a guide on setting up, programming, and consulting schedule timer actions for various modes.
Details the process for programming space heating and domestic water heating actions with time and set points.
Step-by-step instructions for programming space heating and domestic water heating schedules via the controller.
Instructions for setting up programmed actions for space cooling and quiet mode operations.
Explains settings for automatic water temperature adjustment based on outdoor conditions for heating.
Details specific parameters for heating operation, including ambient temperatures and set points.
Details specific parameters for cooling operation, including ambient temperatures and set points.
Offers solutions for common issues like blank controller display, error codes, or schedule timer inaccuracies.
To Next Page
