What to do if Daikin Super Multi Plus D Heat Pump heating stops with flowing sound?
The heating operation of your Daikin Heat Pump might stop suddenly, accompanied by a flowing sound because the system is removing frost from the outdoor unit. Wait for about 3 to 8 minutes.
How to fix Daikin Super Multi Plus D Heat Pump that won't start immediately?
The Daikin Heat Pump operation might not start immediately after pressing the ON/OFF button soon after operation was stopped, or when the mode was reselected. This is to protect the air conditioner. Wait for about 3 minutes.
General| Type | Heat Pump |
|---|---|
| Refrigerant | R410A |
| Series | D-Series |
| Energy Efficiency Ratio (EER) | Varies by model |
| Seasonal Energy Efficiency Ratio (SEER) | Varies by model |
| Heating Seasonal Performance Factor (HSPF) | Varies by model |
| Indoor Unit Types | Cassette |
| Noise Level | Varies by model |
| Energy Efficiency Ratio (Cooling) | Varies by model |
| Coefficient of Performance (Heating) | Varies by model |
| Operating Temperature Range (Heating) | Typically -15°C to 24°C |
| Noise Level (Indoor Unit) | Varies by model |
| Noise Level (Outdoor Unit) | Varies by model |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (WxHxD) | Varies by model |
| Outdoor Unit Dimensions (WxHxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Outdoor Unit Weight | Varies by model |
Essential safety precautions for repair and operation of the air conditioner.
Comprehensive list of all available functions for different models.
Detailed technical specifications for outdoor units.
Detailed technical specifications for various indoor unit types.
Connector diagram for the outdoor unit control PCB (A1P).
Explains normal operation principles for compressor and fans.
Details on high pressure, low pressure, and other protection mechanisms.
Steps and overview for conducting initial test operations after installation.
Instructions for setting parameters using dip switches on the outdoor unit PCB.
Procedures for field setting using wired and wireless remote controllers.
Guidance for users on operating and handling the air conditioner post-installation.
Manual contents and reference pages for various indoor unit types.
General guidelines and warnings for diagnosing issues with operation lamps.
Table listing malfunction codes, contents, and corresponding pages for reference.
Specific troubleshooting steps for RA indoor unit issues like PCB abnormality.
Step-by-step instructions for removing outer panels of the outdoor unit.
Detailed procedure for removing the PCB from the outdoor unit.
Wiring diagrams for outdoor units, showing connections and components.
Wiring diagrams for various types of indoor units.
To Next Page