Danfoss DHP-H Installation Guide

3.4.2 Space requirement
300 mm
300 mm
300 mm
1500 mm
3.4.3 Unpacking
The outdoor unit is packed and delivered in a crate.
1. Unpack the unit from the crate.
2. Check that the delivery contains the following:
▪
Outdoor unit
▪
Front cover
▪
Cover
▪
Disassembled stand
▪
Necessary screws, nuts and washers
3.4.4
Installation
Assemble the stand
1
1
2
3
1 Ends
2 Strut
3 Feet
1. Screw the two horizontal struts together (2) using the two ends (1) as illustrated below. Use 10 x M6x10 screws. The curved edges of
the horizontal struts must be facing inwards.
2. Screw the adjustable feet (3) into the holes under the ends.
Installation Guide
Domestic heat pumps
Danfoss Heating Solutions VMGFQ102
13

Danfoss DHP-H Specifications

General

Brand	Danfoss
Model	DHP-H
Category	Heat Pump
Language	English