Danfoss EKC 361 User Guide

© Danfoss | DCS (ms) | 2019.07
ICS or PM
ICS or PM
Direct mounted CVE (if solenoid
or other additional pilot needed
use Sl and Sll)
ICS or PM
ICS or PM
Indirect mounted CVE (for remote location). CVH
and CVE installation kit (¼"G adapters for Sl and Sll -
027B0995) to be ordered separately
ICAD EKC 361
If existing temperature control set-up includes EKC 366 interface controller your PLC needs adaptation to send the proper analog signal
directly to ICAD motor. Otherwise it can be replaced with EKC 361 controller and temperature sensor for stand-alone control
ICAD
CVE
CVH
SI SII
Inlet
Optional CVH
for add. pilot
CVQ
215 mm117 mm
8.5"4.6"
45 mm 1.8"
Brown
Yellow
4 – 20 mA
White
Orange
24 V DC
24 V AC
+
_
Note: Two separate Power
supplies required
Terminal box -
not supplied
by Danfoss
1
1
Control cable
Supply cable
2
2
CVE
User Guide
Media temperature controller EKC 361
CVE replacement for CVQ
BC309632045439en-000101 |
1

Danfoss EKC 361 Specifications

General

Brand	Danfoss
Model	EKC 361
Category	Temperature Controller
Language	English