Application
This documents provides information about the
Z-Wave commands supported by living connect®
and guidelines on the implementation of Z-Wave
controllers as well as general description of the
living connect® and how to mount it on a radiator.
living connect® is a electronic radiator thermostat.
It can be controlled by either a Danfoss Link
TM
CC
(Central Controller) or a Z-Wave certified control-
ler.
(For control by Danfos Link
TM
CC see separate da-
ta sheet)
living connect® uses Z-Wave wireless communica-
tion technology, is easy to install and is supplied
with adapters for all thermostatic valves manu-
factured by Danfoss and most other radiator
valve manufacturers.
living connect® is battery powered, compact and
very easy to operate with only three buttons on
the front.
The temperature can be changed at any time us-
ing the buttons on living connect®. The change is
transmitted directly to the controller, which can
synchronize the other electronic radiator thermo-
stats in the same room. living connect® features
an open-window function, which closes the valve
if the temperature in the room is falling dramati-
cally. Main features in a system with the control-
ler:
▪
Energy saving
▪
Easy to install
▪
Easy to operate - only three buttons
▪
Provides high comfort
▪
Open window function
▪
Valve exercise function
▪
PID control
▪
Weekly programs with variable set points for
each day
▪
Battery lifetime 2 years, if properly suppor-
ted by the Z-Wave controller
▪
Child lock
▪
Frost protection
▪
Backlit display
System example
Data Sheet
living connect®, Z-Wave Certified Electronic Ra-
diator Thermostat
Danfoss Heating Solutions VDHMB202 © Danfoss 09/2011 1
To Next Page
Need help?
General
