Danfoss PVE Series User Manual

2 520L0403 • Rev CB • Mar 2014 © Danfoss A/S, 2014-03
AMP-version on/off
Function Signal voltage (US)
Neutral U
S
(pin 1) = 0.5 • U
DC
Q: P -> A
U
S
(pin 1) = (0.5 -> 0.25) • U
DC
Q: P -> B U
S
(pin 1) = (0.5 -> 0.75) • U
DC
Function
Signal voltage (A or B)
A (pin 1) B (pin 2)
Neutral 0 0
Q: P -> A U
DC
0
Q: P -> B 0 U
DC
AMP-version
proportional
AMP-stik til PVE serie 4
AMP connector for PVE series 4
AMP-Stecker für PVE Serie 4
Kit AMP pour PVE serie 4
PVE function (grey)
Pos. Description Qty. AMP Code no.
Danfoss
Code no.
Danfoss
Code no with
4 mm cable
1 Wire sealing (blue) 4* 828904-1
157B4992
min. 5 pcs
157B4994
min. 5 pcs.
2 Blind plug (transparent) 1 828922-1
3 JPT contact (loose piece) 4* 929930-1
4 JPT housing keying B (gray) 1 2-967059-1
JPT = AMP Junior Power Timer
Kabel med stik
Cable with connector
Kabel mit Stecker
Câble avec connecteur
PVE-funktion (gråt stik)
PVE-function (grey connector)
PVE-Funktion (Grauer Stecker)
PVE-Fonction (Support gris)
Code: 157B4994
(min. 5 pcs.)
Pin 1 Hvid, White, Weiß, Blance
Pin 2 Blå, Blue, Blau, Bleu
Pin 3 Gul, Yellow, Gelb, Jaune
Pin 4 Rød, Red, Rot, Rouge
Pin 4 F
Pin 3 U-
Pin 2 U+
Pin 1 Us

Danfoss PVE Series Specifications

General

Brand	Danfoss
Model	PVE Series
Category	Controller
Language	English