Danfoss RESD Series User Manual

Page 2 of 4
WIRING DIAGRAMS
OPERATION
 On/Off: Press “ ” to turn on, press “ ” again to turn off thermostat and its output.
 Setting temperature: press “” to reduce temperature, press “” to raise temperature (0.5°C changed each press)
set point only valid in current period of time; Clock adjustment, turn on/off or 7 days programming modification, it will
perform new settings.
Note: When 4 periods function On, press "” or ” ” to adjust current set-point, "Override" will show on LCD, it
denote the thermostat will run as per current setting instead of 4 periods setting.
 Mode Selection: Press “ ” to select cooling “ ”, heating “ ” or ventilation “ ” modes, the related icon will flash,
and it will be confirmed automatically after 6 seconds.
 Fan speed select: Press “ ” to select “ (Hi), (Med), (Low), (Auto)”.
In mode “ (Auto)”, the fan-speed will changed automatically. When: LOW-speed When the difference between
room-temperature and setting-temperature exceed 1°C , Auto MED-speed When exceed °CAuto HI-speed When e xceed 3°C.
CLOCK CALIBRATION
 Clock setting: Press “” till to display “hh:mm” and “hh” flash, press “” or “” to adjust hour, press “”, “mm” flash,
press “” or “” to adjust minute; Press “”, “week” flash, press “” or “” to adjust Mon to Sun.
TIMER ON AND TIMER OFF
 Timer on: Press “”, till to display “” and “ON” and all flash, and also “hh” flash, press “” or “” to adjust hour.
Press “”, “mm” flash, press “” or “” to adjust minute.
 Timer off: Press “”, till to display “” and “OFF” and all flash, and also “hh” flash, press “” or “” to adjust hour.
Press “”, “mm” flash, press “” or “” to adjust minute.
 Canceling timer on: Press “”, till to display “” and “ON” and all flash, and also “hh” flash, press “” or “” to
adjust hour to “--:--”. Press “”, “mm” flash, press “” or “” to adjust minute to “--:--”.
 Canceling timer off: Press “”, till to display “” and “OFF” and all flash, and also “hh” flash, press “” or “” to
adjust hour to “--:--”. Press “”, “mm” flash, press “” or “” to adjust minute to “--:--”.
V1
Low
Med
Fan
Hi
N
L
Value
85to 260V~ 50/60Hz
N L
RESD-HC2
V1
Low
Med
Fan
Hi
N
L
Cooling
85to 260V~ 50/60Hz
N L
V2
Heating
RESD-HC4

Danfoss RESD Series Specifications

General

Brand	Danfoss
Model	RESD Series
Category	Thermostat
Language	English