To Next Page

To Previous Page

User Instructions

Option 1 - Enable or disable A/B programming (DIL switch 3 set to 5+2)

This enables or disables the A/B programming option. Press

+ until Option 1 is displayed, use Λ and V to select required

setting.

Setting 0

Disabled, unit operates as 5/2 or 24 hour product depending on

installer settings (factory setting)

Setting 1 Enabled: activates A/B programming

Option 3 - Calendar clock rules

This establishes the rules that the automatic calendar clock

follows to calculate changes between summer and winter

time. Press + until Option 3 is displayed, use Λ and V to select

required setting.

Setting 0 Disabled.

Setting 1

Manual: user must change using + to advance and - to retard

displayed time.

Setting 2 European rules. (Factory Setting)

Setting 3 USA rules (2007 onwards)

Setting 4 USA rules (pre-2007)

Option 4 - Time zone o set

This feature allows the time zone to be established and

corrects time display. Press + until Option 4 is displayed, use Λ

and V to select required setting

Setting 0 UK models: this feature should be left at the factory setting of 0.

Setting 1

Central European time models: this feature should be left at the

factory setting of +1:00.

-12 Hours +14 Hours

Rest of World: use Λ and V keys to select o set from Universal time (GMT) for the

location in which the thermostat is being installed.

Option 10 - Frost/ thermostat mode setting

This feature allows the default frost/thermostat mode

temperature to be set. Press + until Option 10 is displayed, use

Λ and V to select required setting.

5-40°C - Factory setting is 8°C, but can be changed to any value between 5 -40°C.

Danfoss TP5001RF User Manual

Other manuals for Danfoss TP5001RF