18
Programming heating & hot water system - 24 hour mode
1. Press PROG until SET ON
TIME appears at the top of
the display.
Use the + and - buttons to
set the time you want your
system to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Continue programming the
system ON and OFF times
by pressing:
a) NEXT ON/OFF button to
move to the next setting,
b) + and - buttons to amend
the time
3. Press the PROG button to
return the unit to RUN mode
(time appears & colon in the
display begins to fl ash)
4. Proceed to page 19.
Programming the heating & hot
water in 24 hour mode
To Next Page
Loading...
Need help?
General
