Danfoss VLT 5000 Series Instruction

MI.50.J1.02 - VLT is a registered Danfoss trademark
4
VLT
®
Series 5000 Wobble function
707 Random function (RANDOM FUNC)
Value:
✭ OFF (OFF) [0]
ON (ON) [1]
Function:
This parameter enables a randomized wobble ratio
function. The wobble ratio in parameter 706 is not
active if the random function is enabled.
Description of choice:
Select OFF [0] to disable the random function and use
the wobble ratio set in parameter 706.
708 Random ratio max (RANDOM MAX)
Value:
0.1 - 10 ✭ 1
Function:
This parameter determines the maximum wobble ratio
which the random function is allowed to choose.
Description of choice:
Enter the maximum allowed wobble ratio.
709 Random ratio min (RANDOM MIN)
Value:
0.1 - 10 ✭ 1
Function:
This parameter determines the minimum wobble ratio
which the random function is allowed to choose.
Description of choice:
Enter the minimum allowed wobble ratio.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material.
Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such
alterations can be made without subsequential changes being necessary in specifications already agreed.
© Danfoss Drives A/S (DD-MT2) 09.97 DTP L9
175R0891
MI.50.J1.02

Danfoss VLT 5000 Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Series
Category	DC Drives
Language	English