Danfoss VLT 5016 Operating Instructions

VLT
®
5000 Series
■ Electrical installation
Conversion of analogue
inputs
Current input signal to voltage input
0-20 mA 0-10 V
4-20 mA 2-10 V
Connect 510 ohms resist
or between input terminal 53 and 55
(terminal 54 and 55) and adjust minimum and maximum values in
parameters 309 and 310 (parameters 312 and 313).
MG.51.A9.02 - VLT is a registered Danfoss trademark
56

Danfoss VLT 5016 Specifications

General

Brand	Danfoss
Model	VLT 5016
Category	DC Drives
Language	English