EasyManuals Logo
Home>Danfoss>DC Drives>VLT FC Series

Danfoss VLT FC Series Installation Instructions

Danfoss VLT FC Series
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Items Supplied
VLT
®
Wireless Communication Panel LCP 103.
Gasket
Illustration 1.1 VLT
®
Wireless Communication Panel LCP 103
Compatible Drive Series
NOTICE
Compatible drives have a white USB port.
VLT
®
HVAC Drive FC 102
VLT
®
Refrigeration Drive FC 103
VLT
®
AQUA Drive FC 202
VLT
®
AutomationDrive FC 301/FC 302
VLT
®
Lift Drive LD 302
Compatible software versions
- FC 102: 5.10
- FC 103: 2.10
- FC 202: 3.10
- FC 30x: 8.03
Approvals and Certications
FCC ID: 2ANSELCP-103
NOTICE
FCC COMPLIANCE NOTICE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment
o
and on, the user is
encouraged to try to correct the interference by 1 or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
dierent from that to which thereceiver is
connected.
Consult the dealer or an experienced radio/
television technician for help.
Modications: Any modications made to this device that
are not approved by Danfoss may void the authority
granted to the user by the FCC to operate this equipment.
RF EXPOSURE COMPLIANCE
This portable transmitter with its antenna has shown
compliance with FCC’s SAR limits for general population/
uncontrolled exposure. The maximum listed SAR level is 0.22
W/kg (body). The antenna used for this device must not be
co-located or operating in conjunction with any other
antenna or transmitter.
Installation Instructions
VLT
®
Wireless Communication Panel LCP 103
VLT
®
FC Series FC 102, FC 103, FC 202,
FC 301/FC 302, and LD 302
Danfoss A/S © 08/2018 All rights reserved. MI38V402

Other manuals for Danfoss VLT FC Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss VLT FC Series and is the answer not in the manual?

Danfoss VLT FC Series Specifications

General IconGeneral
BrandDanfoss
ModelVLT FC Series
CategoryDC Drives
LanguageEnglish

Related product manuals