Danfoss VLT FCD 322 User Manual

VLT
®
FCD Series
025 Quick Menu setup
(QUICK MENU SETUP)
Value:
[Index 1 - 20] Value: 0 - 999
✭ 000
Function:
In this parameter you define which parameters are
required in the Quick Menu when parameter 024
User-defined Quick Menu is set to Active [1]
´
.
Up to 20 parameters can be selected for the
user-defined Quick Menu.
NB!:
Please note that this parameter can only be set
using an LCP 2 control panel. See Order form.
Description of choice:
The Quick Menu is set up as follows:
1. Select parameter 025 Quick Menu setup
and press [CHANGE DATA].
2. Index 1 indicates the first parameter in Quick
Menu. You can scroll between the index numbers
using the [+ / -] keys. Select Index 1.
3. Using [< >] you can scroll between the
three figures. Press the [<] key once ad
the last number in the parameter number
can be selected using the [+ / -] keys.
Set Index 1 to 100 for parameter 100 Configuration.
4. Press [OK] when Index 1 has been set to 100.
5. Repeat steps 2 - 4 until all parameters required
have been set to the Quick Menu key.
6. Press [OK] to complete the Quick Menu setup.
If parameter 100 Configuration is selected at
Index 1, Quick Menu will start with this parameter
every time Quick Menu is activated.
Please note that parameter 024 User-defined Quick
Menu and parameter 025 Quick Menu setup are
reset to the factory setting during initialisation.
026 LED Status
(LED STATUS)
Value:
✭Overload (OVERLOAD)
[0]
Therm. warn/alarm 36 (OVERTEMP)
[1]
Thermistor/ETR (THERMAL MOTOR)
[2]
Digital input 18 (DIGITAL INPUT 18)
[3]
Digital input 19 (DIGITAL INPUT 19)
[4]
Digital input 27 (DIGITAL INPUT 27)
[5]
Digital input 29 (DIGITAL INPUT 29)
[6]
Digital input 33 (DIGITAL INPUT 33)
[7]
As relay par. 323 (AS RELAY / P323)
[8]
As dig.outp. par. 341 (AD DIG. OUT. / P341)
[9]
As mech.brake output
(AS MECH. BRAKE OUTPUT)
[10]
Function:
This parameter enables the user to visualize different
situations using the Status LED.
Description of choice:
Select the function to be visualized.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.04.B7.02 - VLT is a registered Danfoss trademark
38

Danfoss VLT FCD 322 Specifications

General

Brand	Danfoss
Model	VLT FCD 322
Category	DC Drives
Language	English