Datalogic PowerScan PM9300 Series User Manual

LED and Beeper Indications
Quick Reference Guide 17
INDICATION DESCRIPTION LED BEEPER
Power-up
Beep
The reader is in
the process of
powering-up.
N/A
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
Good Read
Beep
A label has been
successfully
scanned by the
reader.
LED behavior is
configurable via
the feature
“Good Read:
When to Indi-
cate”
(see the PRG for
information.)
The reader will
beep once at
current fre-
quency, volume,
tonal setting
and duration
upon a success-
ful label scan.
Green Spot
a
flashes
momentarily
Upon success-
ful read of a
label, the soft-
ware turns the
green spot on
for the time
specified
N/A N/A
Link Attempt
The reader is
trying to link to
the base
Slow Flashes N/A
Configura-
tion Align-
ment
Reader and
Base are align-
ing the parame-
ters'
configuration
Fast Flashes N/A
Link
The reader has
successfully
linked to the
base
N/A
3 beeps of
ascending fre-
quency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending fre-
quency

Datalogic PowerScan PM9300 Series Specifications

General

Brand	Datalogic
Model	PowerScan PM9300 Series
Category	Barcode Reader
Language	English