EasyManuals Logo
Home>Datalogic>Barcode Reader>QuickScan QD2131

Datalogic QuickScan QD2131 User Manual

Datalogic QuickScan QD2131
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2015-2017 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright,
no part of this documentation may be reproduced, stored in or
introduced into a retrieval system, or transmitted in any form or by
any means, or for any purpose, without the express written per-
mission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive,
revocable license to reproduce and transmit this documentation
for the purchaser's own internal business purposes. Purchaser
shall not remove or alter any proprietary notices, including copy-
right notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting your Datalogic representa-
tive. Electronic versions may either be downloadable from the Dat-
alogic website (www.datalogic.com
) or provided on appropriate
media. If you visit our website and would like to make comments
or suggestions about this or other Datalogic publications, please
let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information
in this manual that is complete and accurate, however, Datalogic
reserves the right to change any specification at any time without
prior notice.
Datalogic and the Datalogic logo are registered trademarks of Dat-
alogic S.p.A. in many countries, including the U.S. and the E.U.
QuickScan is a trademark of Datalogic S.p.A. and/or its affiliates,
registered in the U.S. and the E.U. All other brand and product
names may be trademarks of their respective owners.
Patents
See www.patents.datalogic.com
for patent list.
This product is covered by one or more of the following patents:
Design patents: EP002158717, ZL201330271434.1, USD723563
Utility patents: EP0789315B1; EP0997760B1; EP1128314B1;
EP1128315B1; EP1164536B1; EP1217571B1; EP1396811B1;
EP1413971B1; EP1804089B1; EP1942442B1; EP2315156B1;
JP5192390B2; US5992740; US6443360; US6454168; US6517003;
US6561427; US6808114; US6997385; US7075663; US7387246;
US7527198; US8006904; US8113430; USRE41349; ZL200680050007.8.
QuickScan™ I QD2131
General Purpose Corded
Handheld Linear Imager
Bar Code Reader
Regulatory Addendum
850030014 (Rev.C) September 2017
Regulatory Information
All models are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly approved by
Datalogic could void the user's authority to operate the equipment.
Statement of Agency Compliance
This device complies with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Class B Compliance Statement
The user is cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio or television technician
for help.
Canadian Notice
This equipment does not exceed the Class B limits for radio noise
emissions as described in the Radio Interference Regulations of the
Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques de la
classe B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.
Customs Union
The CU conformity certification has been achieved; this allows the
Product to bear the Eurasian mark of conformity.
CAUTION
Do not attempt to open or otherwise service any
components in the optics cavity. Opening or ser-
vicing any part of the optics cavity by unautho-
rized personnel may violate safety regulations.
Power Supply
This device is intended to be connected to a UL Listed/CSA Certified
computer which supplies power directly to the reader or else be sup-
plied by UL Listed/CSA Certified Power Unit marked “Class 2” or LPS
power source rated 5-14V minimum 900mA.
QD2430 can be powered by either a 5V or 12V power supply.
Argentina Power Supply Statement
Imager Labeling
Sample labels are shown here to illustrate their location only. Please
view the labels on your product for actual details, as they may vary
from those depicted.
Atencíon
Características de la fuente
de alimentación eléctrica.
5 V
Entrada:
100 - 240 Vca
350 mA, 50-60 HZ
Salida:
5VDC, 2.5A
(-)Negativo al centro
12 V
Entrada:
100 - 240 Vca
600 mA, 50-60 HZ
Salida:
12VDC, 1500mA
(-)Negativo al centro
Utilice en su red solo fuentes certificadas en Argentina.
El uso de fuentes de alimentación no compatibles puede resultar en riesgo
de incendio o de choque eléctrico para el usuario.
CAUTION
The QuickScan™ Handheld Reader is not user-
serviceable. Opening the case of the unit can
cause internal damage and will void the war-
ranty.
Scanner Regulatory Label
This document is an addendum to the
Quick Reference Guide (QRG) for this
product. See the QRG for additional
product information.
©2015-2017 Datalogic S.p.A. and/or its affiliates. All
rights reserved. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U.
www.datalogic.com

Other manuals for Datalogic QuickScan QD2131

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic QuickScan QD2131 and is the answer not in the manual?

Datalogic QuickScan QD2131 Specifications

General IconGeneral
TypeHandheld bar code reader
Wavelength650 nm
Sensor type-
Scanner type1D
Read rate (max)400 reads/s
Yaw reading angle-70 - 70 °
Tilt reading angle-45 - 45 °
Pitch reading angle-65 - 65 °
Linear (1D) barcodes supportedGS1 DataBar Expanded, GS1 DataBar Omnidirectional
2D (matrix & stacked) barcodes supportedNot supported
Product colorBlack
International Protection (IP) codeIP41
Input voltage4.75 - 14 V
Power consumption140 mA
Power source typeBattery
Standard interfacesUSB
Connectivity technologyWired
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth91 mm
Width163 mm
Height41 mm
Weight150 g

Related product manuals