Safety
Precautions
for
ProSub
600
CAUTION! To reduce the risk
of
electric shock and fire, do not remove the cover
or
back
plate
of
this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol
of
a lightning bolt inside a triangle is intended to alert
the user to uninsulated "dangerous voltage" within the device's enclosure. The international
symbol
of
an exclamation point inside a triangle is intended to alert the user to the presence
of
important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade
of
plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousserjusqu'au fond.
CAUTION!
To
reduce the risk
of
electrical shock, do not expose this
equipment
to rain
or
moisture.
1.
Read Instructions-All safety and operating instructions should be read before operating the device.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3.
Heed
Warnings-All
warnings on the device and
in
the operating instructions should be adhered
to.
4.
Follow Instructions-All operating and safety instructions should be followed.
5.
Water &
Moisture-The
device should never be used in, on or near water for risk
of
fatal shock.
6.
Carts &
Stands-The
device should only be used on carts or stands recommended by the manufacturer.
7.
Wall & Ceiling
Mounting-The
device should be mounted on a wall or ceiling only
as
recommended
by the manufacturer.
8.
Ventilation-The device should always be located
in
such a way that it maintains proper ventilation.
It
should never be placed
in
a built-in installation or anywhere that may impede the flow
of
air through its
heat sink.
9.
Heat-Never
locate the device near heat sources such
as
radiators, floor registers, stoves or other
heat-generating devices.
10.
Power
Supply-The
device should only be connected
to
a power supply
of
the type described
in
the
operating instructions or as marked on the device.
II. Power Cord
Protection-Power
cables should be routed so they are not likely to be stepped on or
crushed by items placed on them or against them. Special attention should be paid to areas where the
plug enters a socket or fused strip and where the cord exits the device.
12.
Cleaning-The
device should be cleaned
in
accordance with manufacturer's instructions.
13.
Periods
Of
Non-Use-
The device should be unplugged when not being used for extended periods.
14.
Dangerous
Entry-Care
should be taken that no foreign objects or liquids fall or are spilled inside
the device.
IS.
Damage Requiring
Service-The
device should be serviced by licensed technicians when:
• The plug or power supply cord has been damaged.
• ObjeCts have fallen
or
liquid spilled inside
of
the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a marked change
in
perfonnance.
• The device has been dropped or the cabinet becomes damaged.
16.
Service-The
device should always be serviced by licensed technicians. Only replacement
p'arts
specified
by
the manufacturer should be used. The use
of
unauthorized substitutions may result
in
fire, shock. or other hazards.
To Next Page
Loading...
Need help?
General
