Need help?Do you have a question about the Dell EMC Networking N Series and is the answer not in the manual?
Details the features of the N2200-ON Series switch front panels, including ports and LEDs.
Describes the rear panel components of the N2200-ON Series switches, including stacking ports and power supplies.
Details the RJ-45 and SFP28 port characteristics and auto-negotiation capabilities.
Explains the serial console port functionality, connection requirements, and communication settings.
Describes the USB 3.0 port for flash memory drive usage and its limitations.
Details how to perform a hard or soft reset using the reset button and its impact on configuration.
Details the types of field-replaceable power supplies and their PoE power budget limits.
Explains the definitions for various port and system LEDs on the switch.
Details the environmental and physical requirements for installing the N2200 Series switches.
Provides instructions on package contents and unpacking steps for the switch.
Explains how to safely mount the N2200 Series switch into a standard 19-inch rack.
Provides instructions for installing the switch on a flat surface, ensuring proper ventilation.
Explains how to stack up to 12 N2200 switches using QSFP ports to operate as a single unit.
Describes the standby feature where a backup unit assumes master role if the master unit fails.
Guides on connecting a terminal or emulation software to the switch's console port for initial configuration.
Details the AC and DC power connection procedures for powering on the N2200 Series switch.
Explains the power-on self-test (POST) process and how the switch boots up.
Outlines the initial configuration steps using the Dell Easy Setup Wizard or CLI.
Describes how to enable remote management using the out-of-band or in-band ports.
Details the steps for initial configuration using the Dell Easy Setup Wizard or CLI.
Provides physical dimensions and weight specifications for different N2200-ON models.
Lists operating and storage temperature, humidity, and altitude specifications.
Details input voltage, current draw, and PoE budget for N2200-ON series switches.
Specifies AC power supply ratings and maximum current draw for the switches.
Details minimum/maximum input voltage and power consumption for DC powered switches.
Guides on how to find technical information, software upgrades, and support contacts on the Dell website.
Instructions on obtaining product-specific details using the Service Tag or express service code.
Explains how to find the service tag number using the ONIE prompt and the onie-syseeprom command.
To Next Page
General