NOTICE: Do not use the soundbar power connector with any other device.
1. Attach the Soundbar by aligning the two slots on the Soundbar with the two tabs on the bottom of the monitor.
2. Slide the Soundbar to the left until it snaps in to place.
3. Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4. Insert the green stereo plug from the Soundbar in to your computer's audio output connector.
NOTE: Soundbar Power Connector +12V DC output is for optional only.
NOTICE: Do not use with any device other than Dell Soundbar .
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General