Dell 5330dn - Workgroup Laser Printer B/W User Manual

Installing Accessories
Precautions When Installing Printer Accessories
Installing Printer Memory
Installing USB Font Card
Installing Optional Tray
Installing High Capacity Feeder
Using the hard disk
Installing an Output Expander.
Precautions When Installing Printer Accessories
Never remove the control board cover while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal
or external printer option.
The control board and internal accessories (wireless network interface card, DIMM, and hard disk) are sensitive to static
electricity. Before installing or removing internal accessories, discharge static electricity from your body by touching
something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk around
before finishing installation, discharge any static electricity once again.
Installing Printer Memory
Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
The Dell 5330dn Mono Laser Printer has 256 MB of memory. It can be expanded to 768 MB.
NOTE: Your printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.
1. Power the printer off and unplug all cables from the printer.
2. Grasp the control board cover and remove it.

Dell 5330dn - Workgroup Laser Printer B/W Specifications

General

Brand	Dell
Model	5330dn - Workgroup Laser Printer B/W
Category	Printer
Language	English