Dell Force10 S25N User Manual

THIS IMPLEMENTATION GUIDE IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN
TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS,
WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND.
© 2012 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without
the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
Dell, the DELL logo, and the DELL badge, PowerConnect™, EqualLogic™, PowerEdge™ and
PowerVault™ are trademarks of Dell Inc. Broadcom® is a registered trademark of Broadcom
Corporation. Intel® is a registered trademark of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, Windows Server®, and Active Directory® are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries. VMware®, vSphere®,
ESX™, and ESXi™ are registered trademarks of VMware®

Dell Force10 S25N Specifications

General

Switching Capacity	128 Gbps
Rack Units	1U
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	Yes
Jumbo Frames	Up to 9216 bytes
Power Supply	Dual, hot-swappable
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Dimensions (H x W x D)	1.72 x 17.3 x 16 in (4.4 x 44 x 40.6 cm)