Removing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1 Close the display and turn the computer over.
2 Remove the screws that secure the base cover to the computer base.
3 Using your fingertips, pry the base cover starting at the top edge out of
the computer base.
4 Lift the base cover off the computer base.
1 screws (2) 2 base cover
20
To Next Page
Loading...
Need help?
General
