Dell POWERCONNECT 5548P User Manual

564 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_ARP.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Setting Dynamic ARP Inspection Global Settings Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the
Global Settings pages.
The following is an example of some of the CLI commands:
Table 18-1. ARP Inspection Global Settings CLI Commands
CLI Command Description
ip arp inspection
no ip arp inspection
Enables ARP inspection.
Use the no form of this command to
disable ARP inspection.
ip arp inspection validate
no ip arp inspection
validate
Performs specific checks for dynamic ARP
inspection.
Use the no form of this command to
restore the default configuration.
ip arp inspection logging
interval {seconds |
infinite}
no ip arp inspection logging
interval
Sets the minimum time interval between
successive ARP SYSLOG messages.
Use the no form of this command to
restore the default configuration.
console(config)# ip arp inspection
console(config)# ip arp inspection validate

Dell POWERCONNECT 5548P Specifications

General

Brand	Dell
Model	POWERCONNECT 5548P
Category	Switch
Language	English