Dell PowerConnect 6224 User Manual

Configuring Switching Information 413
• VLAN Mode — Enables or disables the MLD Snooping Querier on the VLAN selected in the VLAN
ID field.
•
Querier Election Participate Mode — Enables or disables the MLD participation in election mode by
the Snooping Querier. When this mode is disabled, upon seeing another querier of same version in the
VLAN, the Snooping Querier transitions to non-querier state. When this mode is enabled, the
Snooping Querier participates in querier election, where in the lowest IP address wins the querier
election and operates as the querier in that VLAN. The other querier transitions to non-querier state.
•
Snooping Querier VLAN Address — Specifies the Snooping Querier address to be used as source
address in periodic MLD queries sent on the specified VLAN.
Adding a New VLAN and Configuring the VLAN Querier Settings
1. Open the MLD Snooping VLAN Querier page.
2. Click Add .
The page refreshes, and the
Add VLAN page displays.
Figure 7-90. Add VLAN Querier
3. Enter the VLAN ID and, if desired, an optional VLAN name.
4. Complete the fields on the page as needed.
5. Click Apply Changes .
The VLAN Querier settings are modified, and the device is updated.
Displaying the MLD Snooping VLAN Querier Summary Table
1. Open the MLD Snooping VLAN Querier page.
2. Click Show All .
The
VLAN Querier Summary Table displays.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)