Voice VLAN Commands 563
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Voice_VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
User Guidelines
Use this command to specify that packets that are classified to the voice
VLAN with a source MAC address that is not a telephony MAC address
(defined by the voice vlan oui-table Global Configuration mode command)
are discarded.
This command is relevant only to ports that were added to the voice VLAN
automatically
Example
The following example enables the secure mode for the OUI Voice VLAN on
gigabitethernet port
1/0/
8.
Console(config)#
interface
gigabitethernet 1/0/8
Console(config-if)#
voice vlan secure
show voice vlan
Use the show voice vlan EXEC mode command to display the voice VLAN
status for all interfaces or for a specific interface.
Syntax
show voice vlan [type {oui | auto}] [
interface-id
]
Parameters
type {oui | auto}—Specifies which information is printed:
oui - common and the OUI Voice VLAN specific parameters are printed
auto - common and the Auto Voice VLAN specific parameters are printed
If the parameter is omitted the current Voice VLAN type is applied.
interface-id—Specifies an interface ID. If the parameter is omitted than
information about all interfaces are printed. Applied only for the OUI VLAN
type.
Parameters Range
interface-id—Ethernet, Port-channel
To Next Page
Loading...
Need help?
General