Dell PowerConnect PC5524 User Manual

DHCP Relay Commands 651
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Relay.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
41
DHCP Relay Commands
ip dhcp relay enable (Global)
Use the ip dhcp relay enable Global Configuration mode command to enable
Dynamic Host Configuration Protocol (DHCP) relay features on the device.
Use the no form of this command to disable the DHCP relay agent.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Default Configuration
DHCP relay features are disabled.
Command Mode
Global Configuration mode
Example
The following example enables DHCP features on the device.
Console(config)# ip dhcp relay enable
ip dhcp relay enable (Interface)
Use the ip dhcp relay enable Interface Configuration (VLAN, Ethernet, Port-
channel) mode command to enable Dynamic Host Configuration Protocol
(DHCP) relay features on the router. Use the no form of this command To
disable the DHCP relay agent features.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English