Dell PowerConnect PC5524 User Manual

692 IP Routing Protocol-Independent Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Routing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Command Mode
Global Configuration mode
Example
The following example configures a static route with prefix 172.16.0.0, prefix
length 16, and gateway 131.16.1.1.
Console(config)# ip route 172.16.0.0 /16 131.16.1.1
ip routing
Use the ip routing Global Configuration mode command to enable IPv4
Routing. Use the no format of the command to disable IPv4 Routing.
Syntax
ip routing
no ip routing
Default Configuration
Enabled by default.
Command Mode
Global Configuration mode
Default Configuration
No routing is defined
show ip route
Use the show ip route EXEC mode command to display the current routing
table state.
Syntax
show ip route [connected | static | {address address [mask | prefix-length]
[longer-prefixes]}]

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English