Dell PowerConnect W-IAP175P User Manual

Home Agent Load Balancing
Home Agent Load Balancing is required in large networks where multiple tunnels might terminate
on a single border or lobby AP and overload it. When load balancing is enabled, the VC assigns the
home AP for roamed clients by using a round robin policy. With this policy, the load for the APs
acting as Home Agents for roamed clients is uniformly distributed across the W-Instant cluster. By
default, home agent load balancing is disabled.
To enable home agent load balancing by performing the following steps:
1. Click the Settings link at the upper right corner of the Instant UI.
2. Click the Show advanced options link and then click L3 Mobility.
3. Select Enabled from the Home agent load balancing drop-down list.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 95 | Layer-3 Mobility

Dell PowerConnect W-IAP175P Specifications

General

Brand	Dell
Model	PowerConnect W-IAP175P
Category	Wireless Access Point
Language	English