Dell SE2417HG User Manual

Troubleshooting | 31
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow the
Safety instructions.
Self-test
Your monitor provides a self-test feature that allows you to check if your monitor is
functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following
steps:
1.
Turn off both your computer and the monitor.
2.
Disconnect all video cables from the monitor. This way, the computer doesn’t
have to be involved.
3.
Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the
following message appears. While in self-test mode, the power LED remains white.
Dell SE2417HG
No VGA Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
?
Dell SE2417HG
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
No HDMI1 Cable
?
Dell SE2417HG
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
No HDMI2 Cable
?

Dell SE2417HG Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	24 inches
Panel Type	tn
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	2 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	8, 000, 000:1
Horizontal Scan Rate	83 kilohertz
VGA Ports	1
Power Saving Mode	0.3 watts
Power Consumption	25 watts
Depth with Stand	7.1 inches
Width with Stand	21.9 inches
Net Weight without Stand	9 pounds