Month yyyy
Statement of Volatility – Dell Venue 11 Pro-7130/7139
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell Venue 11 pro contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the Dell Venue 11 pro system
board.
Table 1. List of Non-Volatile Components on System Board
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
Embedded
Flash in
embedded
controller
MEC1641
Embedded Flash –
288KB user space, 32-bit Access,
10K cycles Endurance.
Embedded
Flash in
embedded
controller
MSP430
Embedded Flash –
NV-RAM 8KB user space. Single
bit write.
Embedded
Flash in
sensor
controller
STM32F10
3CBU6
Embedded Flash –
NV-RAM 128KB user space for
programing.
Embedded
Flash in
TPM
controller
AT97SC32
04
Embedded Flash –
NV-RAM 1280 Bytes user space
for programing.
Non Volatile memory, 64K
bytes.
Non Volatile memory, 16 MB,
System BIOS and Video BIOS
for basic boot operation, PSA
(on board diags), PXE diags.
System
Memory –
LP-DDR3
memory
On board
memory
solution.
U1601,
U1602,
U1701,
1.2V LP-DDR3 SDRAM
device is a low-current self
refresh version of the 1.2V LP-
DDR3 SDRAM device.
To Next Page
Need help?
Display
Processor Options
