Need help?Do you have a question about the DeLonghi Nescafe Dolce Gusto ECLIPSE and is the answer not in the manual?
General| Brand | DeLonghi |
|---|---|
| Model | ECLIPSE |
| Color | Black |
| Pressure | 15 bar |
| Power | 1500 W |
| Voltage | 220-240 V |
| Weight | 3.5 kg |
| Automatic Shut-off | Yes |
| Adjustable Drip Tray | Yes |
| Cup Size | Adjustable |
| Compatibility | Nescafe Dolce Gusto Capsules |
| Energy Saving Mode | Yes |
| Type | Capsule Coffee Maker |
| Features | LED |
Read all instructions, connect to earthed socket, intended for household use, use fresh water, avoid immersion in liquid, keep away from children.
Cool down after intensive use. Do not operate with damaged cord. Avoid accessory attachments. Keep cord away from heat/sharp edges.
Use qualified personnel for plug replacement. Recycle packaging. Be aware of eco-mode power. Keep away from children aged <8.
Diagram identifies components like ON/OFF icon, water tank, capsule holder, drip tray, injector, and cleaning needle.
Details voltage, power, pressure, capacity, dimensions, and economy mode after 5 mins of non-usage.
Explains automatic opening via ON/OFF icon and manual closing ensuring capsule holder is empty.
Illustrates adjusting drip tray, selecting volume, choosing hot/cold, and specific steps for Espresso, Cappuccino, Chococino, and Cappuccino Ice.
Warnings include: no hot water in tank, keep machine upright, do not touch wet plug/machine, use soft damp cloth for cleaning, never touch needle.
Do not touch used capsules, do not use rinsing tool for tea/hot water. Empty/clean machine if away for >2 days.
Ensure correct voltage, connect power, press ON/OFF. Machine heats up, ON/OFF blinks red then turns green.
Rinse water tank, fill with water, insert tank. Place rinsing tool, empty container, start cold rinse, then hot rinse.
Check water, switch on, adjust drip tray, insert capsule, select volume (incl. XL), touch hot/cold icon for brewing.
Steps for preparing a beverage using a single capsule, including volume selection and brewing.
Check water, switch on, adjust drip tray, insert first capsule, select volume, touch icon. Insert second capsule, select volume, touch icon.
Steps for preparing a beverage using two capsules, including volume selection and brewing.
Rinse and clean water tank, drip tray, rinsing tool, and capsule holder. Wash capsule holder or in dishwasher. Perform rinsing cycle.
Remove rinsing tool, reinsert capsule holder. Place drip grid. Clean machine with damp cloth and dry. Unplug power.
Use liquid descaler, avoid vinegar. Mix descaler with water, pour into tank. Remove drip grid/tray. Start descaling with ON/OFF button.
Perform hot water rinse and cold water rinse cycles. Wait for ON/OFF icon to turn green. Clean machine.
Check water tank level. Refill if empty. If full, check for blockages. Machine may stop midway.
Machine may be blocked under pressure. Try to stop preparation. Do not unplug. Machine releases pressure.
Remove capsule holder, injector. Use cleaning needle or descaling solution to unclog injector. Reinsert injector.
Covers various issues like machine not switching on, not closing, or beverage splashing.
Check opening/closing is not blocked. Check power plug and electricity supply. Contact hotline if unresolved.
Used capsule icon blinks orange. Remove used capsule. Insert empty capsule holder and close machine.
Stop preparation. Check capsule for defects. Replace with a new capsule if necessary.
Slow or cool beverage, or steady orange ON/OFF icon, indicates descaling is needed. Use descaler.
ON/OFF icon flashes red fast. Check capsule blockage or contact hotline. Wait 20 mins after unplugging.
Water accumulates underneath or leaks around capsule holder. Check capsule or contact hotline.
To Next Page