13
Self-diagnosis
IF…IS DISPLAYED, WHAT SHOULD I DO?
L
OW TEMPERATURE
(frost prevention)
PROBE FAILURE
(sensor damaged)
FULL TANK
(empty the internal tank)
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice.
The appliance starts up
again automatically when
the defrosting process is
completed.
If this is displayed, contact
your local authorised servi-
ce centre.
See page 15
“END OF SEASON OPERATIONS”
Programming shutdown
•Press the button. The shutdown time and message ( ) flash
on the remote control display.
•Press the or buttons to set the time you want the appliance to
shut down.
• When that time is reached, press the OK button to confirm. The mes-
sage ( ) appears on the remote control display and the sym-
bol is displayed on the appliance to indicate that the timer is active.
SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
To Next Page
Loading...
Need help?
General
