Delta DTB Series User Manual

- 2 -
 Ordering Information
DTB
DTB Series DTB: Delta B Series Temperature Controller
Panel size (W×H)
4824: 1/32 DIN W48 × H24mm
4848: 1/16 DIN W48 × H48mm
4896: 1/8 DIN W48 × H96mm
9696: 1/4 DIN W96 × H96mm
5
1st output group selection
R: Relay output, SPDT (SPST: 1/16 DIN and 1/32 DIN size), 250VAC, 5A
V: Voltage pulse output, 14V +10% ~ -20% (Max. 40mA)
C: DC current output , 4 ~ 20mA L: Linear voltage output, 0 ~ 10VDC
6
2nd output group selection
R: Relay output, SPDT (SPST: 1/16 DIN and 1/32 DIN size), 250VAC, 5A
V: Voltage pulse output, 14V +10% ~ -20% (Max. 40mA)
7
EVENT inputs / CT function
(optional)
None: No EVENT input , No CT (Current transformer)
E: EVENT input is provided, No CT (Current
transformer)
T: CT (Current transformer) is provided, No EVENT
input
V: Valve control
8
Power supply
None: AC 100 ~ 240V; D: DC24V
Note 1: DTB4824 series: no optional function provided and no extra alarm output supported, but user can set 2nd output as alarm mode.
Note 2: DTB4848 series: only one alarm output when optional function supported, but user can set 2nd output as 2nd alarm output.
Note 3: “Valve control” with feedback selection is only available for DTB4896RRV, DTB9696RRV.
 Specifications
Input voltage AC100 ~ 240V, 50/60Hz; DC24V±10%
Operation voltage rrange Rated voltage: AC 85% ~ 110%; DC 90 ~ 110%
Power consumption 5VA max.
Memory Protection EEPROM 4K bit (non-volatile memory (number of writes: 100,000)
Display method 2 line x 4 character 7-segment LED display Process value (PV): Red color, Set point (SV): Green color
Sensor type
Thermocouple: K, J, T, E, N, R, S, B, L, U, TXK
3-wire Platinum RTD: Pt100, JPt100
Analog input: 0 ~ 5V, 0 ~ 10V, 0 ~ 20 m A, 4 ~ 20 m A, 0 ~ 50mV
Control mode PID, ON/OFF, Manual or PID program control (Ramp/Soak control)
Control output
Relay output: SPDT (SPST: 1/16 DIN and 1/32 DIN size), Max. load 250VAC, 5A resistive load
Voltage pulse output: DC 14V, Max. output current 40mA
Current output: DC 4 ~ 20m A output (Load resistance: Max. 600  )
Linear voltage output: 0 ~ 10V
Display accuracy 0 or 1 digit to the right of the decimal point (selectable)
Sampling rate Analog input: 150 msec/ per scan Thermocouple or Platinum RTD: 400 msec/per scan
RS-485 communication MODBUS ASCII / RTU communication protocol
Vibration resistance 10 to 55Hz, 10m/s
2
for 10min, each in X, Y and Z directions
Shock resistance Max. 300m/ s
2
, 3 times in each 3 axes, 6 directions
Ambient temperature 0
o
C ~ +50
o
C
Storage temperature -20
o
C ~ +65
o
C
Altitude 2,000m or less
Relative humidity 35% ~ 80% (non-condensing)
Panel protection level IP65
1
2
3
4

Delta DTB Series Specifications

General

Brand	Delta
Model	DTB Series
Category	Temperature Controller
Language	English