Need help?Do you have a question about the Delta DVP04AD-E2 and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Model | DVP04AD-E2 |
| Manufacturer | Delta |
| Type | Analog Input Module |
| Input Channels | 4 |
| Input Type | Voltage/Current |
| Power Supply | 24V DC |
| Communication Interface | RS-485 |
| Voltage Input Range | 0-10V |
| Current Input Range | 0~20mA |
| Protocol | Modbus RTU |
| Operating Temperature | 0°C~55°C |
| Storage Temperature | -20°C~70°C |
| Humidity | 5~95% RH (non-condensing) |
| Resolution | 12-bit |
| Sampling Rate | 10ms/channel |
Details the active-type connection method for analog signals.
Details the passive-type connection method for analog signals.
Illustrates the physical arrangement of I/O terminals on the module.
Provides key electrical parameters and ratings for the module.
Details settings for voltage input Mode 0 (±10V).
Details settings for voltage input Mode 1 (±5V).
Details settings for voltage input Mode 2 (0~+10V).
Details settings for voltage input Mode 3 (0~+5V).
Details settings for current input Mode 4 (-20mA~+20mA).
Details settings for current input Mode 5 (0mA~+20mA).
Details settings for current input Mode 6 (+4mA~+20mA).
To Next Page
