Denon AVR-2112CI User Manual

94
System Setup
ZONE2 Setup Default settings are underlined.
Set the audio to play back with multi-zone (ZONE2).
“ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign”.
Setting items Setting details
Lch Level
Adjust the left channel
output level.
–12dB – +12dB (0dB)
Rch Level
Adjust the right channel
output level.
–12dB – +12dB (0dB)
Volume Limit
Make a setting for
maximum volume.
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
This is displayed from 0 to 99 when “Volume Display” (vpage95)
is set to “Absolute”.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Last : Use the memorized setting from the last session.
– – – (0) : Always mute when power is turned on.
–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
This is displayed from 0 to 99 when “Volume Display” (vpage95)
is set to “Absolute”.
Mute Level
Set the amount of
attenuation when muting
is on.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Setting items Setting details
Other
(Continued)
Notification : Sets the display of a notification message when the latest
firmware is released.
Update : Displays a notification message on this unit’s menu screen when
the latest firmware is released with “Firmware Update”. The notification
message is displayed for about 20 seconds when the power is turned on.
Connect to broadband Internet (
vpage12) when using this function.
tON : Display update message.
tOFF : Do not display update message.
tWhen you press ENTER during display of the
notification message, the “Check for Update”
screen is displayed (Refer to
page96 for more
information on “Firmware Update”).
tPress
RETURN B to erase the notification
message.
Upgrade : Display a notification message on this unit’s menu screen
when downloadable firmware is released with “Add New Feature”. The
notification message is displayed for about 20 seconds when the power
is turned on. Connect to broadband Internet (
vpage 12) when using
this function.
tON : Display upgrade message.
tOFF : Do not display upgrade message.
tWhen you press ENTER during display of the notification message, the
“Add New Feature” screen is displayed (Refer to
page 97 for more
information on “Add New Feature”).
tPress
RETURN B to erase the notification message.
Rhapsody Account
Set or change Username
and Password
(
vpage42 “Listening to
Rhapsody”).
Username / Password / Clear
tFor character input, see
page76.
Napster Account
Set or change Username
and Password
(
vpage37 “Listening to
Napster”).
Username / Password / Clear
tFor character input, see
page76.
Network Info.
Display network information.
Friendly Name / DHCP=ON or OFF / IP Address / MAC Address
Basic version Advanced version InformationAdvanced version

Denon AVR-2112CI Specifications

General

Brand	Denon
Model	AVR-2112CI
Category	Receiver
Language	English