Denon AVR-4802 User Manual

Name: Denon AVR-4802
Brand: Denon
Rating: 4 (1 reviews)

72 pages

To Next Page

AV SURROUND RECEIVER

AVR-4802

OPERATING INSTRUCTIONS

))

AVR-4802

PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER

MASTER VOLUME

INPUT SELECTOR

ON/STANDBY

THX CINEMA

HOME

PURE

DIRECT

SENSOR

REMOTE

ON/STANDBY

INPUT

SIGNAL

PCM

AUTO

DTS

DIRECT

PURE

DIGITAL

SURROUND SPEAKER

SURROUND BACK CH

OUTPUT

DETECT

SIGNAL

ES DSCRT DVD

VOLUME LEVEL

DIGITAL

We greatly appreciate your purchase of the AVR-4802.

To be sure you take maximum advantage of all the features the AVR-4802 has to offer, read these instructions

carefully and use the set properly. Be sure to keep this manual for future reference should any questions or

problems arise.

“SERIAL NO.

PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE

CABINET FOR FUTURE REFERENCE”

Other manuals for Denon AVR-4802

Service Manual70 pages

Brochure & Specs2 pages

Control Protocol11 pages

Questions and Answers:

J
Jason CrossAug 12, 2025
What to do if my Denon AVR-4802 display is lit but there is no sound?
- J
  Justin WilliamsAug 13, 2025
  If your Denon Stereo Receiver's display is lit but no sound is produced, there could be several reasons: * Check if the speaker cords are securely connected. * Ensure the input source selector button is in the correct position. * Verify the volume control isn't set to the minimum; increase it to a suitable level. * Make sure MUTING is switched off. * Confirm a digital signal is being input and that you've selected the correct digital signal input source. * Check that the Speaker A or B button for the connected speaker terminals is set to 'ON'.

Denon AVR-4802 Specifications

General

Impedance	8 ohms
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
THD	0.05%
Signal-to-Noise Ratio	100 dB
Surround Sound	Dolby Digital, DTS, Dolby Pro Logic II
Component Video Inputs	3
Digital Inputs	5 (3 Optical, 2 Coaxial)
Type	AV Receiver
Channels	7.1
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Inputs	5 Digital (3 Optical, 2 Coaxial)
Outputs	composite video, component video, optical digital
Audio D/A Converter	24-bit/192kHz