EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-887

Denon AVR-887 Specifications

Denon AVR-887
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AVR-887
A/V Surround Receiver
7.1 A/V Surround Receiver features HDMI repeater, conversion,
XM-HD Surround and iPod command and control capability.
Audio section
Fully discrete 7-channel high power amplifiers
Front 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Center 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Surround 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Surround Back 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
High-quality sound reproduction
New high resolution 32bit floating point DSP
96 kHz processing circuit
24 bit, 192 kHz capability high resolution D/A conversion
Denon's basic design for high-quality sound reproduction
• Power transformer for high power driven
Twin drive rectifier
• Large aluminum extruded heatsink
Wide-Range Play Capability for DVD-Audio and Super Audio CD
The power amp circuits of the AVR-887 have been meticulously designed to repro-
duce the exceptionally high sound quality with wide frequency response from 10
Hz to 100 kHz.
Dual-Channel surround back power amp for 7.1 surround
The AVR-887 is equipped with a total of 7 power amps including 2 for the Surround
Back channel speaker to give you more clearly defined sound localization at the rear
for 6.1-channel surround sources such as DTS-ES Discrete 6.1, DTS-ES Matrix 6.1,
Dolby Digital EX, and DTS-ES NEO:6.
Supports the most advanced surround playback formats
• DTS 96/24 Decoding for DVD-Video • DTS-ES Discrete 6.1 and Matrix 6.1
• DTS NEO:6 • DTS • Dolby DIgital • Dolby Digital EX • Dolby Pro Logic IIx
• Neural Surround
Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, DTS or other formats
emphasises high-frequency range due to a theater's front speakers being placed
behind the movie screen. If this sound is reproduced in the home theater without
correction, the high-frequency range is too strong. The AVR-887 features a Cinema
Equalizer to correct these high-frequency components so that the sound is clearer
and easier to listen to. (For Dolby Digital, Dolby Pro Logic IIx, Dolby Digital EX and
DTS surround modes)
Pure Direct mode, for the pure enjoyment of music in high-quality sound
Video section
HDMI In/Out terminals and repeater function (
Supports 1080p signal)
The AVR-
887
is equipped with 2 HDMI inputs, as well as 1 output, allowing the
selection of multiple digital video signals. The HDMI terminals also accepts multi-channel
digital audio input and the input signals can be output via amps.
Video Up/Down conversion capable of output to HDMI
The AVR-887 includes a video up/down conversion function that allows the unit to
be connected to the video monitor via a single cable regardless of the video input
signal's format as follows:
1) Composite video signals are converted to HDMI, component video, & S-video;
2) S-video signals are converted to HDMI, component video, & composite video;
3) Component video signals are converted to HDMI
Component video circuits which maintain flat response up to 100MHz,
ensuring sharp image quality
3 sets of component video inputs
Connectivity/ Expandability
ASD-1R Control Dock for iPod
®
(option): Supports iPod playback
when connected to the AVR-887
iPod (*1) playback can be enjoyed through the AVR-887
when the ASD-1R, Denon's original Control Dock for iPod
(sold separately), is connected to the dedicated control ter-
minal of the AVR-887. The iPod can also be controlled via
the remote controller supplied with the AVR-887.
*1) Supports 3rd-generation and later iPods equipped with a Dock connec-
tor. Some functions may not work depending on the generation of the iPod
and the version of the software.
XM Mini-Tuner Ready*
(Supports XM 5.1ch surround powered by Neural Audio)
*Optional XM Mini-Tuner and subscribes are required.
Auto Setup and RoomEQ with Microphone
The AVR-887 includes an Auto Set-up function that performs basic settings for
the speakers based on frequency response data for the speakers and the lis-
tening room that was measured by a supplied high-performance microphone,
and a Room EQ (equalizer) function that optimizes frequency response character-
istics for the listening room.
Black version is also available.
AVR887_E3.qxd 06.8.28 19:06 Page 1

Other manuals for Denon AVR-887

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-887 and is the answer not in the manual?

Denon AVR-887 Specifications

Power IconPower
rated output front100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output front alternative135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output center100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output center alternative135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround alternative135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround back100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround back alternative135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
power supplyAC 120 V, 60 Hz
power consumption5.5 A
Audio Inputs and Outputs IconAudio Inputs and Outputs
analog inputs9 sets
analog ext inputs8
digital inputs optical4
digital inputs coaxial2
audio delay function0 - 200 msec.
variable subwoofer crossover40/60/80/90/100/110/120/150/200/250 Hz
Video Inputs and Outputs IconVideo Inputs and Outputs
component video inputs3 sets
composite inputs5
s-video inputs5
component video outputs1 set
composite outputs3
s-video outputs3
Audio Performance IconAudio Performance
frequency response10 Hz - 100 kHz (+1, -3 dB)
signal-to-noise ratio100 dB (IHF-A weighted)
tone control treble±6 dB at 10 kHz
tone control bass±6 dB at 100 Hz
Weight and Dimensions IconWeight and Dimensions
dimensions17-3/32” (W) x 6-47/64” (H) x 16-27/64” (D)
dimensions metric434 (W) x 171 (H) x 417 (D) mm
weight29 lbs 5 oz
weight metric13.0 kg

Related product manuals