Need help?Do you have a question about the Denon AVR-X250BT and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Pre-out connectivity | Yes |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Power output per channel (1KHz@6 Ohm) | 90 W |
| Power output per channel (1KHz@8 Ohm) | 70 W |
| Power output per channel (20-20KHz@8 Ohm) | 130 W |
| AirPlay | No |
| Display | VFD |
| HDCP version | 2.2 |
| Product color | Black |
| Audio decoders | DTS-HD, DTS-HD Master Audio, Dolby Pro Logic II, Dolby TrueHD |
| HDMI in | 5 |
| Composite video in | 2 |
| Digital audio coaxial in | - |
| Supported graphics resolutions | 3840 x 2160 |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 330 W |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | Clamp terminals |
Weight and Dimensions| Depth | 319 mm |
|---|---|
| Width | 434 mm |
| Height | 151 mm |
| Weight | 7500 g |
To Next Page
