EasyManuals Logo
Home>Denon>Receiver>AVR-X4000

Denon AVR-X4000 Factory Reset

Denon AVR-X4000
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2.0. Microprocessor Reset
2.1. Turn off the power using ON/STANDBY.
2.2. Press ON/STANDBY while simultaneously pressing "INFO" and "BACK" (under front panel flap).
2.3. Once the display starts flashing at intervals of about 1 second, release the two buttons (hold for at least 4-5
seconds). If in step 2.3 the display does not flash at intervals of about 1 second, start over from step 2.0.
2.4. jdsmoothie from the AVS Denon forum suggests doing this rest 4 or 5 times in a row, not just once.
3.0. Optional: Network & Microprocessor Reset
3.1. Turn off the power using ON/STANDBY.
3.2. Press ON/STANDBY while simultaneously pressing the "UP" and "DOWN" arrows (under front panel
flap).
3.3. Once the display starts flashing at intervals of about 1 second, release the two buttons (hold for at least 4-5
seconds). If in step 3.3 the display does not flash at intervals of about 1 second, start over from step 3.0.
3.4. jdsmoothie from the AVS Denon forum suggests doing this rest 4 or 5 times in a row, not just once.
4.0. Load Settings
4.1. Using IE to perform a LOAD of the config.dat file may or may not work, however using another browser
will generally work every time. Enter the following URLs into your laptop/desktop web browser replacing the
192.168.1.xxx with your own unit's IP address. The URL is case-sensitive.
4.2. <192.168.1.xxx/SETUP/OTHERS/LOAD/f_config_load.asp>
4.3. The following dialog should be displayed on the laptop:

Other manuals for Denon AVR-X4000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4000 and is the answer not in the manual?

Denon AVR-X4000 Specifications

General IconGeneral
Receiver type-
Frequency range10 - 100000 Hz
Output impedance16 Ω
Speaker selectorA+B
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)102 dB
Total Harmonic Distortion (THD)0.008 %
Power output per channel (1KHz@6 Ohm)165 W
Power output per channel (20-20KHz@8 Ohm)125 W
HDMI in7
AC (power) inYes
Composite video in4
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
Number of HDMI outputs3
Connectivity technologyWired
Speakers connectivity typeBanana connector
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Image formats supportedJPG
Wi-FiNo
RDS featuresPTY, TP
FM band range87.5 - 108 MHz
Supported radio bandsFM
Internet radio services supportedSpotify, vTuner
Supported video modes1080i, 1080p, 480p, 576p, 720p
DisplayVFL
Color depth24 bit
Aspect ratio4:3, 16:9
Product colorSilver
Audio decodersDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibilityNot supported
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.1 W
Power consumption (typical)670 W
Weight and Dimensions IconWeight and Dimensions
Depth379 mm
Width434 mm
Height167 mm
Weight12300 g

Related product manuals