Denon AVR-X4400H Service Manual

START::|sX3k6VQNaf/6VbQg1Aav9Q==|4T5qXRrOj24wm8HR+zKOBrbK30+wiKuaxR52txZH6yk=|XOIUVeyoWOE5XcWqSdEcbA==|::END
INTEGRATED NETWORK AV RECEIVER
AVR-X4400H
Click here!
On-line service parts list
http://dmedia.dmglobal.com/Document/DocumentDetails/23507
Online Parts List (P5 to P7)
WEB owner’s manual (Release schedule)
http://manuals.denon.com/AVRX4400H/NA/EN/index.php (July 2017)
http://manuals.denon.com/AVRX4400H/EU/EN/index.php (July 2017)
http://manuals.denon.com/AVRX4400H/AP/ZH/index.php (September 2017)
CAUTION IN SERVICING
ELECTRICAL
MECHANICAL
REPAIR INFORMATION
UPDATING
Service Manual
Ver. 1
•Forpurposesofimprovement,specicationsanddesignaresubjecttochangewithoutnotice.
•Pleaseusethisservicemanualwithreferringtotheoperatinginstructionswithoutfail.
•Someillustrationsusinginthisservicemanualareslightlydifferentfromtheactualset.

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g