(3)
Starting Playback
• Press the PLAY/PAUSE button during pause or cue mode to start playback.
• Playback begins immediately when the PLAY button is pressed. (Instant Play Start)
The PLAY/PAUSE LED lights when playback starts.
• The point at which playback starts is automatically stored in the memory as the cue point. When the CUE button is
pressed, the pickup then returns to the cue point (the point at which playback started). (Back Cue)
Figure 11
•
When the SINGLE indicator is lit, playback stops automatically at the end of that track.
•
When the CONTINUE indicator is lit, playback continues until the end of that disc.
(4)
Stopping Playback
There are two ways to stop playback.
Press the PLAY/PAUSE button during playback to pause at that point.
Press the CUE button during playback to return to cue mode at the position at which playback started.
Cue)
(
Back
Figure 12
(5)
Pausing
Press the PLAY/PAUSE button to switch between play and pause
The PLAY/PAUSE LED blinks when the pause mode is set.
Figure 13 shows the relationship between the play and pause.
mode.
The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.
Playing
The pause mode is set when the PLAY/PAUSE button is pressed again.
Pausing
Playback resumes when the PLAY/PAUSE button is pressed again.
Playing
Figure 13
Back
Cue
13
Pause
To Next Page
Loading...
Need help?
Power
Operating Environment
Weight and Dimensions
