Dentsply Sirona CEREC Primescan AC User Manual

New as of:
09.2019
CEREC Primescan AC,
Primescan AC
Operating Instructions (not valid for USA)
English

Dentsply Sirona CEREC Primescan AC Specifications

General

Type	Intraoral Scanner
Manufacturer	Dentsply Sirona
Depth of Field	20 mm
Storage Temperature	-20°C to 60°C
Interface	USB 3.0
Warranty	2 years
Field of View	14 x 14 mm
Resolution	High resolution for detailed scans
Data Output	STL
Software Compatibility	CEREC Software
Power Supply	100-240 V, 50/60 Hz
Operating Temperature	10°C to 40°C
Relative Humidity	non-condensing
Battery Life	Not applicable

Summary

General Product Information

1.5 Warranty and Liability

1.6 Intended Use

Specifies authorized use of the unit and required personnel qualifications for safe operation.

Safety and Operational Guidelines

2.2 Basic Safety Precautions

Covers installation, prerequisites, general handling, movement, maintenance, modifications, and accessories for safe operation.

2.4 Electrostatic Discharge (ESD) Precautions

2.7 Disposal Procedures

Product Description and Specifications

3.2 Technical Data

3.3 Controls and Functional Elements

3.6 Electromagnetic Compatibility (EMC)

Provides information on EMC compliance, emission, immunity, and working clearance guidelines for safe operation.

Installation and Startup Procedures

4.4 Initial Startup Process

Guides through initial setup: connections, trackball use, battery insertion, powering on/off, and battery operation.

4.4.1 Plug Connections

4.4.4 Switching the Units On

Guides on powering on the acquisition unit, including precautions and the ON button function.

4.4.5 Switching the Units Off

Explains the correct procedure for shutting down the operating system and unit to prevent data loss.

4.4.6 Battery-backed Operation

Operating the CEREC Primescan AC

5.1 Touch Monitor Interaction

5.2 Acquiring Optical Impressions

Details scanner operation, safety, image brightness, and the scanning process for capturing dental impressions.

Scanner Heating and Operation

Explains scanner heating for condensation, blow-drying teeth, and the step-by-step scanning procedure.

5.2.1 Concluding Optical Impressions

5.3 Scanner Guidance and Scanning Techniques

Provides step-by-step guidance for various intraoral scanning techniques and jaw registration.

5.3.1 Intraoral Scanning Techniques

Guides on performing occlusal, buccal, lingual, and approximal scans for dental impressions.

5.3.5 Jaw Registration and Full Jaw Scanning

5.4 Scanner Software Functions

Maintenance and Component Care

6.1 Cleaning and Disinfection Procedures

Outlines procedures for cleaning, disinfecting, and sterilizing unit components and accessories to ensure hygiene.

6.1.1 Approved Cleaning Agents

6.1.2 Cleaning Surfaces

6.1.4 Scanner Sleeve Handling and Cleaning

Covers scanner cleaning, sleeve removal/attachment, disinfection, sterilization, and disposable sleeves.

6.1.5 Cleaning Inside of Sleeve Window

6.2 Scanner Calibration

Provides instructions on when and how to calibrate the scanner for optimal measurement results.

6.3 Color Calibration

Explains the importance and procedure for color calibration to ensure accurate color analysis.

6.4 Fuse and Battery Management

6.7 O-ring Replacement