DeWalt DCH072 User Manual

4
ENGLISH
EC‑Declaration of Conformity
Machinery Directive
Heavy-Duty Cordless Rotary Hammerdrill
DCH072
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
23.04.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DCH072
Heavy-Duty Cordless Rotary Hammerdrill
DeWALT declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN60745‑1:2009+A11:2010,
EN60745‑2‑6:2010
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
DCH072
Voltage V
DC
12
Type 1
Battery type Li‑Ion
Maximum power output W 400
No‑load speed min
‑1
0–910
No‑load beats per min bpm 4280
Single impact energy (EPTA 05/2009) J 1.1
Optimum drilling range mm 4–10
Maximum diamter concrete mm 14
Tool holder SDS plus®
Weight (without battery pack) kg 1.7
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑6:
L
PA
(emission sound pressure level) dB(A) 86
L
WA
(sound power level)
dB(A) 97
K (uncertainty for the given sound level) dB(A) 3
Drilling into concrete
Vibration emission value a
h, HD
= m/s
2
9.7
Uncertainty K = m/s
2
1.5
Drilling into metal
Vibration emission value a
h, D
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
Screwdriving
Vibration emission value = m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
HEAVYDUTY SDS PLUS® ROTARY HAMMERDRILL
DCH072

DeWalt DCH072 Specifications

General

Brand	DeWalt
Model	DCH072
Category	Rotary Hammer
Language	English