EasyManuals Logo
Home>Digi>Network Hardware>CM Series

Digi CM Series User Manual

Digi CM Series
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1. Establish a serial connection through the console port (9600, 8, N, 1).
2. Login and enter the default user name and password. The default user name is root. The default password is printed on the device label.
If a password is not on the label, the default password is dbps. If neither default password works, the password may have been updated.
Check with your system administrator.
3. Type the command configmenu. Select option 1 - Network Configuration and follow the prompts.
4. Enter the IP address in the URL address bar of your browser and go to Test Configuration.
4 Test configuration
1. Insert the RJ-45 diagnostic loop into Port 1.
2. In the log in dialog, enter the default user ID and password. The
default user ID is root. The default password is printed on the
device label. If a password is not on the label, the default password
is dbps. If neither default password works, the password may have
been updated. Check with your system administrator.
3. Log in to port 1. The default user name is root. The default
password is printed on the device label. If a password is not on the
label, the default password is dbps. If neither default password
works, the password may have been updated. Check with your
system administrator.
Verify your connection to the port by typing some text. If the text
appears correctly on the screen, the configuration is correct.
4. Click Close to exit the port.
5. In the left navigation pane, click Serial
Port>Connection>PortTitle#.
You have successfully installed your Digi CM. Configure the device for your application using your browser. To get back to your Digi CM after
your initial configuration, enter the IP address in the URL address bar and log in. Use the navigation bar on the left to alter your configuration.
The following table shows a list of available adapters and part numbers.
Connection Adapters (in quantities of 8) Order # Application
DB-9M Modem adapter 76000702 DCE devices such as modems with DB9 female ports
DB-9F Console adapter 76000671 Bay Accelar, Nortel and other DB-9 DTE
DB-25F Console adapter 76000673 DTE devices with DB-25 male ports
DB-25M Modem adapter 76000670 DCE devices such as modems
DB-25M Console adapter 76000672 Sun SPARC and other DTE devices with DB-25 female ports

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi CM Series and is the answer not in the manual?

Digi CM Series Specifications

General IconGeneral
BrandDigi
ModelCM Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals