DigiTech AA2170 User Manual

2
SETTING UP YOUR HEADPHONES (BLUETOOTH®):
USING AUX CONNECTION:
1. Press and hold the [ • ] button to turn on the headphones.
Bluetooth® will be already active as soon as you turn on the headphones.
The Red/Blue light will start to blink.
2. On your Smart Phone/Bluetooth® Device, turn on Bluetooth and search for
device name “AA2170”.
3. Pair your Smart Phone/Bluetooth® Device to “AA2170”, it should connect
automatically.
Note: On occasion it may request for a password before pairing.
Default password is “0000”.
4. If the pairing is successful, the Blue light on the headphones will stay on.
5. You can now playback music/tracks from your Smart Phone/Bluetooth®
Device. The controls on the headphones are now active. You can answer phone
calls, play/pause music and adjust volume etc.
1. Plug in the AUX cable into the headphones. This will disable Bluetooth® on the
headphones.
2. Plug in the other end of the AUX cable to your Smart Phone/Playback Device.
Supports Mobile phones/MP4/MP3/CD/PC etc.
3. Active Noise Cancelling can be activated while connected via AUX by toggling
the ANC Switch.

DigiTech AA2170 Specifications

General

Brand	DigiTech
Model	AA2170
Category	Headphone
Language	English