To Next Page

To Previous Page

PRODUCT DIAGRAM:

1 Video Audio In RCA Composite video and L/R audio input from video source device such as

VHS. Yellow = video, white = audio left channel, red = audio right channel. (The

video source device should include the video cable, usually it is the 3RCA to

3RCA male cable or 3.5mm to 3RCA male video cable)

2 HDMI Out Connect to TV or monitor to display video with HDMI Cable.

(HDMI Cable is not included.)

3 USB Plug USB drive to save recorded video files. (Supports up to 32GB)

4 DC Connect to 5V DC power with USB-C to USB-A cable.

(Wall power adapter is not included)

5 Micro SD card Plug Micro SD card to save recorded files. (Supports up to 64GB)

6 Record Button Press to record video, press again to stop and save file.

7 REC LED The red recording (REC) LED will flash for a few seconds when the USB drive

or Micro SD card is inserted, once the LED remains the USB drive or Micro SD

card is ready. The LED will flash while recording. The LED will switch off for a

few seconds and then remain lit when recording has stopped. If you remove the

USB drive or Micro SD card, the LED will switch off.

8 PWR LED The green power (PWR) LEDwill flash for a few seconds after connecting power,

then stays green.

Note: Please do not plug USB drive and Micro SD card at the same time. AC1792 will only support FAT32

and NTFS formats, exFAT is not supported.

8 7 6

DigiTech AC1792 User Manual

Questions and Answers: